Audio Preset Memory; Audio Preset Recall - Kenwood KDC-U7053BT Instruction Manual

Audio adjustments

Audio preset memory

You can register the values set the Audio control
items.
1
Set the audio control items
Set up the <Audio control> (page 7).
2
Enter the Audio control mode
Press the Control knob.
3
Select the Audio preset memory mode
Select the following items using the Control
knob.
"Detailed Settings" > "Audio Preset"
4
Select the Audio preset memory
Turn the Control knob to select "Memory", and
then press the Control knob.
5
Determine the selection
Turn the Control knob to select "YES", and then
press the Control knob.
"Memory Completed" is displayed.
6
Exit the Audio Control mode
Press and hold the [
⁄
• Register a pair of Audio preset memories. You cannot
register them by source.
• When you press the [Reset] button, audio control values of
all sources will be set to the values registered here.
• The following Audio control items can be registered.
"Bass Center FRQ", "Bass Level", "Bass Q Factor", "Bass EXT",
"Middle Center FRQ", "Middle Level", "Middle Q Factor",
"Treble Center FRQ", "Treble Level", "SubWoofer Level", "HPF",
"LPF SubWoofer", "SubWoofer Phase"
8
|
KDC-U7053BT/ KDC-U7053BTL
] button.

Audio preset recall

You can recall the Audio control items registered to
the <Audio preset memory> (page 8).
1
Select a source
Press the [SRC] button.
2
Enter the Audio control mode
Press the Control knob.
3
Select the Audio preset memory mode
Select the following items using the Control
knob.
"Detailed Settings" > "Audio Preset"
4
Select the Audio preset recall
Turn the Control knob to select "Recall", and
then press the Control knob.
5
Determine the selection
Turn the Control knob to select "YES", and then
press the Control knob.
"Recall Completed" is displayed.
6
Exit the Audio Control mode
Press and hold the [ ] button.