Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Kenwood KDC-U6046L
Summary of Contents for Kenwood KDC-U6046L
- Page 1 CD-RECEIVER KDC-U7046BT KDC-U7046BTL KDC-U6046 KDC-U6046L INSTRUCTION MANUAL The latest version of the Instruction Manual can be downloaded from www.kenwood.com/cs/ce/. Before reading this manual, please access this site to check whether your manual is the latest one. © B64-4640-10/01 (MW/M3W)
-
Page 2: Table Of Contents
Registering to the Preset Dial Number List During a call Call waiting Clearing the Disconnection Message Making a voice dialing call Displays of phone number type (category) KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L Bluetooth Audio Operation Before Use Basic Operation Bluetooth Setup Registering Bluetooth device... -
Page 3: Before Use
• If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • Characters that conform to ISO 8859-1 can be displayed. -
Page 4: Basic Operations
Turn the Control knob to select “YES”, and then press the [ENTER] button. The demonstration mode can also be canceled in the Function setting mode. Refer to 40 Demo Mode of <Function setting> (page 15). KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L KDC-U7046BT KDC-U7046BTL Disc slot Microphone... -
Page 5: Common Operation
Volume Turn the Control knob to adjust the sound volume. Display scroll KDC-U6046 KDC-U6046L Keep the [DISP] button pressed down to scroll through the CD or audio file text display. KDC-U7046BT KDC-U7046BTL Keep the Control knob pushed towards up to scroll through the CD or audio file text display. -
Page 6: General Opreration
• Do not place the faceplate (and the faceplate case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L Function of KDC-U6046/ KDC-U6046L Muting the audio upon reception of phone call The audio system automatically mutes when a call comes in. -
Page 7: Audio Adjustments
For how to select source item, refer to <Power and –15 — +15 (dB) source selection> (page 5). Enter Audio Control mode Through/40/60/80/100/ KDC-U6046 KDC-U6046L 120/150/180/220 (Hz) Press the [AUDIO] button. KDC-U7046BT KDC-U7046BTL 120/150/180/220 (Hz) 1) Press the [FNC] button. -
Page 8: Audio Control
“Middle Center FRQ”, “Middle Level”, “Middle Q Factor”, “Treble Center FRQ”, “Treble Level”, “SubWoofer Level”, “HPF Front”, “HPF Rear”, “LPF SubWoofer”, “Subwoofer Phase” KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L Audio Preset Recall Recalling the sound setup registered by <Audio Preset Memory> (page 8). -
Page 9: Music Disc/Audio File Operation
Music disc/Audio file Operation Function of Audio file/ Internal CD source Music Search Selecting the music you want to listen to from the device or media being played now. Enter Music Search mode Press the [ ] button. “MUSICSEARCH” is displayed. Search for music Audio file Operation type... -
Page 10: Music Search
Turn the Control knob to select “Direct Search”, and then press the [ENTER] button. Select browse item Turn the Control knob to select browse item, and then press the [ENTER] button. KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L Display Browses item Playlists Artists... -
Page 11: Related Search
Display Browses music “Search Artist” Displays the album of the same artist. “Search Album” Displays music in the album in which the one being played is included. “Search Genre” Displays the artist of the same genre. “Search Composer” Displays the album including music created by the same composer. -
Page 12: Direct Music Search
Press the [ ] button on the remote control. ⁄ • Direct Music Search cannot be performed during playing of iPod. KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L Function of disc changers Basic Operation of Disc Changer (Optional) Selecting CD changer source Press the [SRC] button. -
Page 13: Tuner Operation
Tuner Operation Station Preset Memory Putting a station in the memory. Select the frequency to put in the memory Push the Control knob towards right or left. Enter Preset Memory mode Press the [ ] button. Preset the station Turn the Control knob to select preset number (“P1”... -
Page 14: Favorite Control
Audio control item Display control* Display control item Hands-free phone Telephone number retrieval. * Function of KDC-U6046/ KDC-U6046L , Audio control item and Display (KDC-U7046BT/ KDC-U7046BTL control item are contained in Function setting.) When selecting registerable items, the “ indicator is lit for 5 seconds. -
Page 15: Function Setting
Function setting Configure the functions of this unit using the following procedure: Search for the item to set Pick up the item to set according to <Function item> (page 15). Select the source Press the [SRC] button. Switch to the source that displays the item to set according to <Function list>... -
Page 16: Audio Settings
21 Music-linked Illumination Effect: “ILLUMI Music SYNC” ➤ “ON”, ”OFF” Sets whether the key illumination color is changed in conjunction with the sound volume. KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L Tuner Settings 22 Seek Mode: “Seek Mode” ➤ “Auto1”, ”Auto2”, ”Manual” Selects the tuning mode of the radio. - Page 17 Arabic, Persian, or Thai: Folder name/ File name/ Song title/ Artist name/ Album name/ KCA-BT200 (optional accessory) Function of the KDC-U7046BTL/ KDC-U6046L. 34 Built in AUX: “Built-in AUX” ➤ “ON”, “OFF” Sets whether to display AUX during source selection.
- Page 18 Adjust the voice of caller. Setting to “+” increases the voice volume. Function of the KDC-U7046BT/ KDC-U7046BTL KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L 56 Noise Cancel: “NR Level” ➤ “-3” – ”0” – “+3” Reduces the noises generated by surrounding environment without changing the built-in microphone volume.
- Page 19 Function list Function items that appear when any source is selected Function item list “Settings” “Clock & Date” “DISP & ILLUMI” “Display Control” (“DISP SELECT”) “DEMO Mode” Function items that appear during standby Function item list “Initial Settings” “SRC Select” “Key Beep”...
-
Page 20: Display Settings
Refer to 11 Display Graphic Selection of <Function setting> (page 15). Exit Function setting mode Press the [ ] button for at least 1 second. KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L Selecting Text Display Changes displayed information on each of the following sources: In Tuner source... - Page 21 Spectrum analyzer & Clock Date Displays the status (Type A display only) Blank Enter Display control mode KDC-U6046 KDC-U6046L Press the [DISP] button. KDC-U7046BT KDC-U7046BTL 1) Press the [FNC] button. 2) Turn the Control knob to select “Display Control”, and then press the [ENTER] button.
-
Page 22: Operation Of Hands-Free Phoning
Select the characters. Turn the Control knob. Move the character page. Push the Control knob towards up or down. KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L Search for the name Press the [ENTER] button. Select the phone number Turn the Control knob. Pushing the Control knob towards right or left sorts the Phone Book by name. -
Page 23: Calling A Number In The Phone Book
Calling a number in the call log Enter Bluetooth mode KDC-U7046BT KDC-U7046BTL Press the [ ] button. KDC-U6046 KDC-U6046L Press the [FNC] button for at least 1 second. “BT MODE” is displayed. Select the call log mode Turn the Control knob to select “Incoming Calls”, “Outgoing Calls”, or “Missed Calls”, and... -
Page 24: Call Waiting
] button. KDC-U6046 KDC-U6046L Press the [FNC] button for at least 1 second. “HF Disconnect” disappears. KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L Function of KCA-BT200 (Optional Accessory) Making a voice dialing call Enter Bluetooth mode Press the [FNC] button for at least 1 second. -
Page 25: Bluetooth Audio Operation
Press the [SRC] button. Select the “BT AUDIO” ( KDC-U7046BT )/ “BT AUDIO EXT” ( KDC-U7046BTL ) display. KDC-U6046L For how to select source item, refer to <Power and source selection> (page 5). Pause and play Press the [ ] button. -
Page 26: Bluetooth Setup
Turn on the this unit. Start registering a unit by operating the Bluetooth device By operating the Bluetooth device, register the hands-free unit (pairing). Select “KENWOOD BT CD/R-4P1” or “KCA-BT200” from the list of connected units. Enter a PIN code Input the PIN code registered as mentioned in <Registering PIN Code>... -
Page 27: Registering Bluetooth Device
Enter Bluetooth mode KDC-U7046BT KDC-U7046BTL Press the [ ] button. KDC-U6046 KDC-U6046L Press the [FNC] button for at least 1 second. “BT MODE” is displayed. Enter Function setting mode Press the [FNC] button. Select PIN code edit mode The item can be selected and determined as follows. -
Page 28: Selecting The Bluetooth Device You Wish To
• If a cell-phone is already selected, deselect it, and then select a different one. • If you cannot select a device using the audio player, connect the device with the audio player. KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L Deleting a Registered Bluetooth device You can delete a registered Bluetooth device. -
Page 29: Displaying The Firmware Version
Display the version of the firmware of this unit. Enter Bluetooth mode KDC-U7046BT KDC-U7046BTL Press the [ ] button. KDC-U6046 KDC-U6046L Press the [FNC] button for at least 1 second. “BT MODE” is displayed. Enter Function setting mode Press the [FNC] button. -
Page 30: Adding A Voice Dialing Command
Exit Bluetooth mode Press the [SRC] button. ⁄ • Set the voice tag for all the 5 categories. If the voice tag is not registered for all the categories, the Phonebook may not be recalled by voice command. KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L... -
Page 31: Sms (Short Message Service)
Enter SMS Inbox mode KDC-U7046BT KDC-U7046BTL Press the [ ] button for at least 1 second. KDC-U6046 KDC-U6046L 1) Press the [FNC] button for at least 1 second. 2) Press the [FNC] button. 3) The item can be selected and determined as follows. -
Page 32: Basic Operations Of Remote Control
• Enter Music search mode: [5]/[∞] • Movement between items during Music search mode: [5]/[∞] • Return to previous item: [ KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L Hands-free phone control Making a call • Enter Bluetooth mode: [ ] • Select a dialing method: [5]/[∞] ➜ [ENT] •... -
Page 33: Appendix
In this case, “RESUMING” is displayed without displaying a folder name, etc. Changing the browse item will display a correct title, etc. • You cannot operate iPod if “KENWOOD” or “✓” displayed on iPod. English... - Page 34 KENWOOD Music Editor. • “KENWOOD Music Editor Lite ver1.0” is available from the following web site: www.kenwood.com/cs/ce/ • For further information on “KENWOOD Music Editor Lite ver1.0”, refer to the site above or the application...
-
Page 35: Laser Product
• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners. -
Page 36: Troubleshooting Guide
☞ Clean the media, referring to the CD cleaning of the section on <Handling CDs> (page 3). ✔ The recording condition is bad. ☞ Record the media again or use another media. KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L The messages shown below display your systems condition. TOC Error: •... - Page 37 No Music Data/Error 15: • The connected USB device contains no playable audio file. • Media was played that does not have data recorded that the unit can play. USB ERROR: Some trouble may have occurred to the connected USB device. ➪...
-
Page 38: Specifications
: AVRCP (Audio/Video Remote Control Profile) : PBAP (Phonebook Access Profile) : OPP (Object Push Profile) : SYNC (Synchronization Profile) : MAP (Message Access Profile ) KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L CD player section Laser diode : GaAlAs Digital filter (D/A) - Page 39 : 10 kΩ General Operating voltage KDC-U7046BT/ KDC-U7046BTL : 14.4 V (10.5 – 16V allowable) KDC-U6046/ KDC-U6046L : 14.4 V (11 – 16V allowable) Maximum Current consumption : 10 A Installation Size (W x H x D) : 182 x 53 x 155 mm Weight : 1.3 kg...
- Page 40 This symbol mark indicates that Kenwood manufactured this product so as to decrease harmful infl uence on the environment.