Connect To The Rs-232 Console Port; Connecting To The Rs-232 Console Port - Patton electronics SmartNode 4400 Getting Started Manual

SmartNode 4400 Series Getting Started Guide
Note The SmartNode CD-ROM contains a collection of third party software
tools (including TFTP servers and Telnet utilities) to help you configure,
operate and monitor the SmartNode device.

Connect to the RS-232 console port

The RJ-45 Console port is wired as an EIA-561, RS-232 port. Use the included Model 16F-561 adapter and
cable (see figure 17) between the SmartNode's Console port and a PC or workstation's RS-232 serial interface.
Activate the terminal emulation program on the PC or workstation that supports the serial interface
(e.g. HyperTerm).
Terminal emulation program settings:
• Asynchronous
• 9600 bps
• No parity
• 8 bit
• 1 stop bit
• No flow control
1. Configure IP address
4 • Getting started with the SmartNode 4400 Series
0 /0
H
E T
0 /1
H
E T
Figure 17. Connecting to the RS-232 Console port
V
4 0
z )
0 -2 0 H
1 0
0 -6 M P
(5
1 A
rt s
P o
lc o
T e
5 0
o le
n s
C o
t
s e
R e
Console port
Model 16F-561
adapter and cable
Laptop PC
38