Removing The Power And Volume-Buttons Board; Prerequisites; Procedure - Dell Inspiron 13 7000 Series Service Manual

Removing the Power and
Volume-Buttons Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Remove the battery.
3 Follow the procedure from step 1 to step 3 in "Removing the

Procedure

1 Peel off the adhesive tape that secures the power and volume-buttons
board cable to the palmrest and keyboard assembly
2 Disconnect the power and volume-buttons board cable from the system
board.
3 Remove the power and volume-buttons board cable from the routing
guides on the speaker.
4 Peel off adhesive the tape that secures the power and volume-buttons
board to the speaker.
base cover.
Computer. After working inside your
After Working Inside Your
Hard Drive".
33