Replacing the Speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Using the alignment posts on the palmrest and keyboard assembly, place
the speakers on the palmrest and keyboard assembly.
2
Route the speaker cable through the routing guides on the palmrest and
keyboard assembly.
3
Adhere the adhesive tapes that secure the speaker cable on the palmrest
and keyboard assembly.
4
Connect the speaker cable to the system board.
Post-requisites
1
Replace the
power and volume-buttons
2
Replace the battery.
3
Replace the
base
38
Computer. After working inside your
cover.
After Working Inside Your
board.