Replacing The Power And Volume-Buttons Board; Procedure; Post-Requisites - Dell Inspiron 13 7000 Series Service Manual

Hide thumbs Also See for Inspiron 13 7000 Series:
Table of Contents

Advertisement

Replacing the Power and
Volume-Buttons Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1
Place the power and volume-buttons board into the slot on the palmrest
and keyboard assembly.
2
Adhere the adhesive tape that secures the power and volume-buttons
board to the speaker.
3
Route the power and volume-buttons board cable through the routing
guides on the speaker.
4
Connect the power and volume-buttons board cable to the system
board.
5
Adhere the adhesive tape that secures the power and volume-buttons
board cable to the palmrest and keyboard assembly.

Post-requisites

1
Follow the procedure from step 4 to step 6 in "Replacing the
2
Replace the battery.
3
Replace the
base
Computer. After working inside your
cover.
After Working Inside Your
Hard
Drive".
35

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inspiron 13–7347

Table of Contents