Removing The Palmrest And Keyboard Assembly; Prerequisites; Procedure - Dell Inspiron 13 7000 Series Service Manual

Removing the Palmrest and
Keyboard Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Remove the battery.
3 Follow the procedure from step 1 to step 3 in "Removing the
4 Remove the
5 Remove the
6 Remove the touchpad.
7 Remove the fan.
8 Remove the
9 Remove the
10 Remove the speakers.
11 Remove the
12 Remove the
13 Remove the

Procedure

After performing the steps in prerequisites we are left with the palmrest and
keyboard assembly.
base cover.
stylus-holder assembly.
keyboard daughter-board.
heat sink.
I/O board.
display assembly.
power-adapter port.
system board.
Computer. After working inside your
After Working Inside Your
Hard Drive".
69