Table of Contents
Advertisement
Motor Select Jumper
The Motor
motor
is
lines.
Select jumper, MTl'
Sf~L,
should be connected when the spindle
to
be
turned
on
using
Drive Select or Motor On Control
NOTE
The following jumpers are located on the read/write
can t ro 1 boa rd.
x
=
Connected
=
Not Connected
Write Protect (Wl)
The
standard
write
protect
feature
is
wl removed.
control is inhibited with Wl installed.
Write protect
wl
x
write Protect
wri te Protect control,
in response to a wri te
protected diskette, inhibits Write Gate, thus
disallowing
the flow
of write data to the
read/write heads.
write Protect Control is inhibited.
Head Type (W2, W3)
This option selects the type of head used.
w2
x
W3
x
Head Type
Tunnel erase.
Straddle erase (optional).
W4 Through W8
W4 through W8 are not used.
Side Select (W9)
For use in double-sided drives.
W9
x
Side Select
For use in single-sided drives, TM5U-l.
For use in double-sided drives, TM50-2.
NOTE
The following jumper is located on the motor control board.
3-11
Advertisement
Table of Contents
