SE:CTION 2
PRODUCT SPECIfICATIONS
INTRODUCTION
This section
contains
the
mechanical,
electrical and operational,
reliability, and
environmental
specifications
for
the TM50-1 and
TM50-2 drives.
2.1
MECHANICAL SPECIfICATIONS
The physical dimensions of the drive are located in
Figure 2-1.
2.2
ELECTRICAL AND OPERATIONAL SPECIFICATIONS
The electrical and operational specifications are located
in Table 2-1.
2.3
RELIABILITY SPECIFICATIONS
The reliability specifications are located in Table 2-2.
2.4
ENVIRONMENTAL SPECIfICATIONS
The environmental specifications are located in Table 2-3.
TAN DON CORPORATION, CHATSWORTH, CALI fORNIA
91311
2-1
I
179[)[)[) 001
REV. A