Table of Contents
Advertisement
SECTIUN 3
UPERATION
INTRODUCTION
This
section
contains
information
on how to unpack, check out,
in-
stall, and operate the TM50-1 and TM50-2 drives.
3.1
UNPACKING THE DRIVE
The drives are shipped
in
protective containers to
minimize
the
possibility
of
damage
during
shipment.
The following list is the
recommended procedure for unpacking the drive.
1.
Place the container on a flat work surf ace,
top side up.
2.
Cut the tape that holds the tab in the slot on the front side
of the container.
CAUTION
Container may spri ng open when the tape is cut.
3.
Remove the drive from its plastic bag.
4.
Inspect the drive for possible damage.
5.
Notify the carrier immediately if any damage is found.
3.2
6.
Save the shipping container for future use.
PREINSTALLATION CHECKOUT
Before
applying
power
to the drive, the following inspection should
be conducted:
1.
Check to ensure the front latch rotates easily.
should remain in the open position when rotated
counterclockwise (horizontal to front panel).
NOTE
When the latch is moved to an open position,
the head arm raises.
I t
fully
2.
Remove the cardboard shipping insert, and retain for
future shipment.
3.
Ensure the front panel is secure.
3-1
Advertisement
Table of Contents
