Planet WNAP-1260 User Manual page 85

 Idle Timeout:
 My IP Address:
 Subnet Mask:
 Sever Address:
 Gateway IP
Address:
 Domain Name
Server (DNS)
Address:
 MTU Size:
 Router MAC
Address:
After finishing settings, click Apply to save the settings.
recommend you to use this connection mode.
 Dial On Demand: If you select it, the system automatically
establishes a connection when a network access request from the
LAN is received. If no network access request is sent from the
LAN within the specified time of Idle Timeout, the system
automatically interrupts the connection. If you pay for Internet
access by time, you are recommended to use this connection
mode, which effectively saves the expense of Internet access.
Manually Connect: If you select it, you need to manually set dialup
connection after startup.
If the system does not detect any Internet access behavior within the
specified time of Idle Timeout, the system interrupts the Internet
connection
Enter your IP address. You can also leave this field blank
Enter the subnet mask. You can also leave this field blank
Enter the IP address of the server. You can also leave this field
blank
Enter the IP address of the gateway. You can also leave this field
blank
Select Use These DNS Servers if you know that your ISP does not
automatically transmit DNS addresses to the router during login.
And enter the IP address of your ISP's primary DNS server. Enter a
secondary DNS server address if available
Set the maximum transmission unit. The default value is
recommended
See descriptions on setting Router MAC Address for DHCP
-77-
User's Manual of WNAP-1260