Planet WNAP-1260 User Manual page 50

- As an AP
You can perform WPS settings using the Web page for configuration.
Choose Wireless Settings > WPS Setup to display the WPS page.
PBC mode

Step 1 Select Push Button and click Start PBC. WPS encrypted connection starts.
Step 2 Press the WPS button on the network adapter or click the PBC button in the network
adapter configuration tool within 2 minutes to start WPS connection. After WPS
connection is established, the following page is displayed, indicating that the WPS
connection is completed.
PIN mode

Step 1 Select PIN, enter the PIN code of the network adapter (refer to the client of the network
adapter), and click Start PIN to start WPS connection.
Step 2 Click the PIN button on the network adapter within 2 minutes to start WPS connection.
After WPS connection is established, the following page is displayed, indicating that the
WPS connection is completed.
As a client
-
You can perform WPS settings using the Web page for configuration.
Choose Wireless Settings > WPS to display the WPS page.
PBC mode

Step 1 Select Push Button and click Start PBC. WPS encrypted connection starts.
Step 2 Start the WPS PBC process. After WPS connection is established, the following page is
displayed, indicating that the WPS connection is completed.
PIN mode

Step 1 Select PIN, click Generate New PIN, and click Start PIN to start WPS connection.
User's Manual of WNAP-1260
Figure 6-9
-42-