Planet WNAP-1260 User Manual page 15

Software Features
Operation Mode
Wireless Mode
Encryption Security
Wireless Security
Wireless Advanced
Max. Clients
Internet Connection
Type
Firewall
Routing Protocol
VPN Pass-through
LAN
System
Management
Standards Conformance
IEEE Standards
AP/Router
Repeater
Client
(Switchable by H/W)
AP, Client, WDS PTP, WDS PTMP, Repeater (WDS+AP), Universal
Repeater (AP+Client)
WEP (64/128-bit) encryption security
WPA / WPA2 (TKIP/AES)
WPA-PSK / WPA2-PSK (TKIP/AES)
Provide wireless LAN ACL (Access Control List) filtering
Wireless MAC address filtering up to 16 entries
Support WPS (Wi-Fi Protected Setup)
Enable/Disable SSID Broadcast
WMM(Wi-Fi Multimedia): 802.11e Wireless QoS
Multiple SSID: up to 4
Wireless Isolation: Enable it to isolate each connected wireless clients, to
let them cannot access mutually.
IAPP(Inter Access Point Protocol): 802.11f Wireless Roaming
Provide Wireless Statistics
Wire: 253
Wireless: 32
Shares data and Internet access for users, supporting following internet
access:
Dynamic IP

Static IP

 PPPoE
 PPTP
 L2TP
NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting Port Forwarding, Port Triggering, and DMZ
Built-in firewall with IP address/ MAC address/ Port/ URL filtering
Support ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter, DoS
protection
Static Routing
SIP ALG, PPTP, L2TP, IPSec
Built-in DHCP server supporting static IP address distributing
Support UPnP, Dynamic DNS
Support IGMP Proxy
Web-based (HTTP) management interface
SNTP time synchronize
Easy firmware upgrade
IEEE 802.11n (2T2R, up to 300Mbps)
-7-
User's Manual of WNAP-1260