Planet WNAP-1260 User Manual page 63


Encryption Type:

Encryption
Strength:

Key 1/2/3/4:
- WPA-PSK[TKIP] or WPA2-PSK[TKIP]
WPA-PSK: Preshared key Wi-Fi protection access

 WPA2-PSK: Preshared key Wi-Fi protection access version 2
 TKIP: Temporal Key Integrity Protocol
 PassPhrase: Enter 8-63 ASCII characters or 64 hexadecimal digits.
If selected, the router uses an authentication type of Open or
Shared keys according to the request of the host.
 Open:
If selected, hosts in the wireless network can pass the
authentication and connect to the wireless network without
using a password. However, the password is required if you
want to transmit data.
 Shared keys:
If selected, hosts in the wireless network can pass
authentication only when the correct password is entered.
Otherwise, the hosts cannot connect to the wireless network.
The type of the key to be set. Hexadecimal and ASCII code are
available.
 Hex: Valid characters for keys contain 0–9 and A–F.
 ASCII: Valid characters for keys contain all characters of the
key board.
The encryption strength determines the length of the key.
 If Encryption Strength is set to 64 bits, set the key to 10
hexadecimal digits or 5 ASCII characters.
 If Encryption Strength is set to 128 bits, set the key to 26
hexadecimal digits or 13 ASCII characters.
Set the key based on the selected encryption type and encryption
strength.
Figure 7-10
Figure 7-11
-55-
User's Manual of WNAP-1260