Table of Contents
Advertisement
User's Manual of WNAP-1260
Chapter 10. Web Configuration for the Client Mode
10.1. Client Mode Topology
In Client Mode, the WNAP-1260 is supposed to act as a wireless station for the PC or other wired-only
network device. Users can site survey the available local AP and choose someone to connect with.
10.2. Hardware Setting
Set the three-way switch on the side panel to Client after WNAP-1260 is powered on.
10.3. Running Status
Log in to the configuration page after the system is started.
Click Running Status and the extended navigation menu is shown as follows:
Click the submenu to enter a specific configuration page.
10.3.1. System Status
Choose Running Status > System Status and the System Status page is displayed.
-122-
Hide quick links:
Advertisement
Table of Contents
