Chapter 7. Web Configuration For The Bridge Mode; Bridge / Ap Mode Topology; Hardware Setting; Running Status - Planet WNAP-1260 User Manual

User's Manual of WNAP-1260

Chapter 7. Web Configuration for the Bridge Mode

7.1. Bridge / AP Mode Topology

7.2. Hardware Setting

Set the three-way switch on the side panel to AP after WNAP-1260 is powered on.

7.3. Running Status

Log in to the configuration page after the system is started.
Click Running Status and the extended navigation menu is shown as follows:
Click the submenu to enter a specific configuration page.

7.3.1. System Status

Choose Running Status > System Status and the System Status page is displayed.
-48-