Starting Setup In Web Ui - Planet WNAP-1260 User Manual

4.6. Starting Setup in Web UI

Default SSID: WiFiRepeater-001
*Default Wireless Security: None
STEP 1: Please use your PC to site survey the wireless signal of WNAP-1260, and connect
your PC with it wirelessly.
STEP 2: 1. Assign a static IP address to your PC which should be in the same network
segment with the WNAP-1260. You may choose from 192.168.1.2 to
192.168.1.254, except the default IP address "192.168.1.253" of WNAP-1260.
2. Open the web browser on your PC, key in the IP address (http://192.168.1.253)
of the WNAP-1260 in the address bar, and then press enter.
3. The default User name and Password are both "admin". Enter them and then
click OK.
User's Manual of WNAP-1260
-22-