Rear/Side Panel And Interface Description - Planet WNAP-1260 User Manual

2.3. Rear/Side Panel and Interface Description

Rear Panel
Side Panel
Object
WAN/LAN
Reset
AP/Repeater/Client
WPS
Figure 2-4
Figure 2-5
If WNAP-1260 is set to the Router mode, the interface is a
WAN interface which connects WNAP-1260 to WAN or uplink
network devices.
If WNAP-1260 is set to the Repeater/Client mode, the
interface is an LAN interface.
Press the Reset button gently for 3-6 seconds and then
release it. The system restores to the factory default settings.
It is used for setting WNAP-1260 to the AP, Repeater, or
Client mode.
AP mode—including the Bridge and router modes
Repeater mode—to expand wireless network coverage
Client mode—equivalent to a wireless network adapter
For enabling WPS PBC mode. For more information, refer to
WPS descriptions for each mode.
Table 2-2
-11-
User's Manual of WNAP-1260
Description