Planet WNAP-1260 User Manual page 34

Step 2 Click Setup Wizard in the navigation bar on the left pane of the page. Select Wireless
Universal Repeater Mode and click Next.
Step 3 Click Site Survey to search for the wireless network you want to connect. Select a desired
network. Click Next.
Step 4 Configure the repeater with the same security option as its uplink network. (The following
figure takes the security option of WPA2-PSK[AES] as an example.) Set the encryption
password and note it down. Click Next.
User's Manual of WNAP-1260
Figure 5-2
Figure 5-3
Figure 5-4
-26-