Table of Contents
Advertisement
1 * D I S C O N . 2
D I S C O N . ^
0 2 1 7 3 9 6 7 3 0
TAB. 3
KEYPAD FUNCTIONS
Function Key
*
a
A
is displayed behind the channel number if the sending of DTMF tones is activated. To
send DTMF tones, the fee-based option DTMF must be enabled.
O p t i o n :
b - l i n e
Description
The caller on the respective channel is set in the PRETALK
mode. This is only possible if a external telephone is connected
and the handset of the phone is not hooked.
The PRETALK can be carried out via the via a standard tele-
phone.
The caller is set in the HOLD mode.
The signal which the caller listens to in this status can be set via
the PC Software (see CHAPTER 5.5.1.1.3, Page 43).
The caller on the corresponding channel is set in the ON AIR
mode.
The caller signal can be heard on the corresponding Audio line
Audio 1/2 OUT. There is no mixing of the two callers.
X T
K e y p a d
P A G E 8 7
Advertisement
Table of Contents
