Talkmaster Xt® Software; Hardware Requirements; Installing The Talkmaster Xt ® Software - Yellowtec b-line Manual

5 T A L K M A S T E R X T ® S O F T W A R E
The configuration of the system can be carried out comfortably with the use
of the Talkmaster XT
5.1

Hardware requirements

The PC used must meet the following minimum requirements:
– IBM PC AT, IBM PS/2 or 100% compatible
– Pentium Processor (> 1 GHz) recommended
– Windows XP/7
– 7 MB available hard disk space
– Screen resolution 800 x 600 Pixel
– LAN interface for PC control and configuration (alternatively RS232)
– Microsoft, IBM PS/2 or 100 % software compatible mouse
5.2 Installing the Talkmaster XT ® Software
Please insert the CD included in delivery in your CD-ROM drive. The soft-
ware automatically starts your internet browser.
After the installation please start the software by clicking on the Talkmaster
XT ® symbol.
Connect the system via the LAN interface with your network. If you do not
have a network you can also connect the unit to your PC directly via a so-
called cross over network cable.
How to configure the LAN interface is described below (see CHAPTER 5.5.1,
Page 42).
Alternatively, you can also use the RS232 interface and a serial 1:1 cable (only
Pin 2 and Pin 3 are used, Pin 5=Ground) to connect your PC with the system.
T a l k m a s t e r
Software included in delivery.
®
X T ® S o f t w a r e
P A G E 3 3