T a l k m a s t e r
X T
®
P A G E 4 2
S o f t w a r e
5.5
Menu Configuration
FIG. 18
5.5.1
Submenu Control Interface
Preferably, the system is configured and operated via the LAN interface. Al-
ternatively, you can also operate the system via the RS232 interface.
LAN
For controlling the system via the LAN interface please select Interface
UDP.
FIG. 19
Under Parameter
one network interface card in your PC, select the desired one.
The standard IP Address of the system is 192.168.96.102 and the standard
control Port 10000.
To enable a connection with your PC, you have to be in the same subnet.
Therefore, please enter an IP address from your subnet
To change the IP address on the front keypad of the system, press the softkey
→
Menu
desired IP address. When entering manually you have to be sure that the IP
address is not already used by another unit
1
In this way you can find out your own subnet: Under Windows XP click on Start
Enter cmd in the command line. An entry window is displayed in which you must enter ipconfig.
Your IP address is displayed (e.g. 192.168.12.35). Your subnet is accordingly 192.168.12.xxx.
2
To check if the IP address is already used in the network, follow the instructions: Under Windows
XP click on Start
in which you must enter ping xxx.xxx.xxx.xxx. Whereas xxx stands for the IP address you want
to check.
MENU CONFIGURATION
LAN PARAMETERS
→
Interface edit <Default>. If there should be more than
→
system settings
LAN settings
→
Execute .... Enter cmd in the command line. An entry window is displayed
1
.
→
IP Address
. Enter now the
2
.
→
Execute ....
→