Table of Contents
Advertisement
T a l k m a s t e r
X T
®
S o f t w a r e
5.6.4
Submenu Firmware Download
The required firmware for the b-line XT system is always included in the PC
software: Via the Firmware Download you can comfortably download the
firmware on your system.
By using the Browse button you select the firmware file. It is always located
in the same directory in which you installed the b-line XT application. The
standard installation directory is:
C:\Program Files\b-line XT
The file name of the firmware is „blxt.ssw".
FIG. 57
SUBMENU FIRMWARE DOWNLOAD
Please press the Start button to download the firmware. The Progress bar
displays the progress of the download. The process is finished after about
three minutes. If the download was successful, a corresponding message is
displayed. After your confirmation the system is reset.
NOTE
If the download was not successful, you can simply switch off the unit and
switch it on again. The new software is only written in the flash memory if
the download was successful. Otherwise the old firmware is maintained.
P A G E 7 7
Advertisement
Table of Contents
