Table of Contents
Advertisement
PC control via RS232/Keypad 1
• If you want to operate the system with the PC via RS232 or you want to use
a b-line XT Keypad, you must set the data rate in accordance with the in-
terface. There are five baud rates available: Keypad (9600 Baud, None),
PC (19200 Baud, None), PC (38400 Baud, None), PC (57600, None) and
PC (1152000, None).
NOTE
The b-line XT Keypad supports only the baud rate 9600 Baud. Therefore,
please select the option Keypad (9600 Baud, None) if you use a keypad.
If you connect a PC via the RS232 interface, the selected baud rate must cor-
respond with the baud rate of the COM interface ((see CHAPTER 5.5.1).
Please note that the LAN interface is deactivated when you use the RS232 in-
terface for PC control.
System Name
• Under Name you can assign a name to your system.
Using External Phone as Pretalk Interface (only available in POTS mode)
• If you want to use an external POTS Telephone for Pretalk, please select
Enabled under Phone 1 or/and Phone 2. If you use a handset or a head-
set, please select the option Disabled.
NOTE
Please note that an external phone can only be used when b-line XT is oper-
ated in POTS line mode.
5.5.2.2.2
Line Interface
Via the option Line Interface the ISDN interface and the POTS interface can
be configured.
FIG. 32
T a l k m a s t e r
LINE INTERFACE
X T
®
S o f t w a r e
P A G E 5 5
Advertisement
Table of Contents
