Table of Contents
Advertisement
• Under External prefix number please enter the prefix number that you
need to get an external line. In most cases it is 0.
ATTENTION
You need to enter the prefix number at any rate if you work with a private
branch exchange because otherwise the system does not wait for the free-line
signal. Without dialling the prefix number at a private branch extension the
!
telephone number is transmitted too fast and no connection can be estab-
lished.
• Some private branch exchanges transmit telephone numbers with prefix
number to the system. If you enable the function Skip prefix number on
incoming call, you can save a displayed number in the phone book with-
out prefix number since the prefix number of the displayed number is de-
leted automatically.
Auto Answer
• You can enable the system to accept incoming calls automatically. For this
function please activate the option Enable Auto Answer.
• Under Answer call on audio line you can select the Audio line to which
the caller will be switched after he has been accepted by the system.
• To delay the automatic answer of an incoming call, the option Auto An-
swer Delay is available. You can adjust the setting within the range of
0 sec and 31 sec.
Line Level Output Offset
Under Attenuation you can adjust the Line Level Output Offset within the
range of - 16 dB ...0 dB.
T a l k m a s t e r
X T
®
S o f t w a r e
P A G E 5 7
Advertisement
Table of Contents
