Configuration Of The Lan Interface; Line Mode: Pots Or Isdn - Yellowtec b-line Manual

Digital dual hybrid and phone system for pots / isdn / voip
Table of Contents

Advertisement

O p e r a t i o n
v i a
D i s p l a y
P A G E 2 6
a n d
K e y p a d
4.1.3

Configuration of the LAN interface

To configure the LAN interface follow the instructions below:
– Press the
– Please mark the option
and press the
– Use the cursor keys
Select
the
– To enter or change the IP Address of the system, mark the option
dress
and press the
– Now you can enter the correct IP Address via the numerical keypad.
– Press the
you want to
stored in the system.
TIP
You reach the settings for the
1 4 1
.
The currently allocated IP address of the system can also be displayed by
pressing the telephone button
if currently no Audio connection is established.
NOTE
Maybe further settings which can also be found under the option
tings
are necessary (e.g.
fault Gateway
can tell you the correct settings.
4.1.4

Line mode: POTS or ISDN

To set the operating mode POTS or ISDN the following steps are necessary:
NOTE
If you are not in the main menu, please press the
– Press the
– Please mark the option
and press the
– Go to the option
Select
the
Line Mode
– Select
– Now you can enable the desired operating mode
sor keys
– Press the
you want to
stored in the system.
TIP
You reach the settings for the
Menu
softkey.
System Settings
Select
softkey.
and
to get to the option
softkey.
Select
softkey.
key to get back to the main menu. Now you are asked if
Save Settings?
. Via the
IP Address
on the front keypad of the system twice
Sub-Net Mask
). In that case please contact your network administrator, who
Menu
softkey.
System Settings
Select
softkey.
Line Interface
using the cursor keys
softkey.
Select
and press the
Select
and
and the
softkey.
key to get back to the main menu. Now you are asked if
Save Settings?
. Via the
Line Mode
directly via the key sequence:
via the cursor keys
LAN settings
Yes
softkey, the configuration is
directly via the key sequence:
, standard: 255.255.255.000, and
key first.
via the cursor keys
and
softkey again.
ISDN
POTS
or
via the cur-
Yes
softkey, the configuration is
and
and press
IP Ad-
Menu
LAN set-
De-
and
and press
Menu 1 1 1

Advertisement

Table of Contents
loading

Table of Contents