The Talkmaster Xt ® Main Window - Yellowtec b-line Manual

T a l k m a s t e r X T ®
P A G E 3 4
S o f t w a r e
Operation via the Talkmaster XT ® Software
In the following chapters, all functions of the Talkmaster XT
described in detail.
5.3 The Talkmaster XT ® main window
After starting the Talkmaster XT
automatically (see Fig. 10).
The connection status between PC and system is displayed in the bottom right
corner of the window:
Following further status messages are possible:
NOTE
If the connection is faulty, please check the following points:
– External power supply of the system is plugged in (display available)
– LAN or serial 1:1 cable is connected with PC and system
– Correct IP Address and Port are selected (if LAN interface is used)
– COM port and correct baud rate are selected in the software (if RS232 in-
terface is used)
Software, the main window is displayed
®
PC ONLINE: Connection is okay
PC OFFLINE: Connection with PC is faulty
PC ONLINE ALARM: Upcoming alarm
(see System Monitor, green-dark green blinking)
ISDN REMOTE: A remote connection exists
(red-white blinking)
ISDN REMOTE ALARM: Upcoming alarm in remote
system (blue-dark blue blinking).
® Software are