Yellowtec b-line Manual page 45

– One Fader: Both ON AIR caller signals are available at one Audio out-
put. You can define which Audio interfaces are used for the ON AIR
line and the Pretalk lines.
– Two Faders: The ON AIR caller signals are available at separate Audio
outputs (ON AIR 1 and ON AIR 2). You can define which Audio inter-
faces are used for the ON AIR and Pretalk lines.
– Shared: The system is operated exactly like the b-line ISDN/POTS i. e.
one Pretalk line and either one common ON AIR line or two separate
ON AIR lines (ON AIR 1 and ON AIR 2) are available.
NOTE
If you select the Shared Mode and work with several PCs and Keypads, the
caller lines will not be locked for the other users if one user works with the
caller, e.g. switches him to Pretalk/ON AIR. This is only possible in the One
Fader or Two Faders Mode.
• To allow Pretalk or/and ON AIR conferences, the options PRE TALK
Conference or/and ON AIR Conference must be enabled. If you do not
activate these options, only one caller is allowed to be in Pretalk or/and
ON AIR at a time. As soon as a second caller is switched to Pretalk or ON
AIR, the first caller is automatically switched to HOLD.
Audio Line Assignment
• Under Audio Line Assignment you can assign the Audio interfaces to the
ON AIR and Pretalk lines.
• In the column Name you can see which name is displayed on the front dis-
play of b-line XT if the corresponding Audio line has switched a caller to
Pretalk or ON AIR.
• The column Audio Line shows the available Pretalk and ON AIR Audio
lines. If a caller is switched to one of these Audio lines by a user, the other
users who are working with the PC Software will see the corresponding
name displayed on the Pretalk and ON AIR buttons.
Example: User 1 is working with the Audio line PRETALK PC 1. If he
switches a caller to Pretalk, user 2 who is working with a second PC will
see PREATLK PC 1 displayed on the Pretalk button. On the front display
of the system
• In the column Audio Interface you can select which Audio interface is to
be assigned to which Audio line. If you do not want to use an Audio line,
select Not used in the column Audio Interface.
• Via the column ON AIR Access you can define if a user working with the
corresponding Audio line can put a caller to ON AIR or not.
• If you want to assign a different name to the Audio line to be displayed in
the PC Software, you can enter a new name under Custom Label.
• To select the default settings for your selected operating mode, please click
on Default Settings. For safety reasons you must confirm that you really
want to select the default settings.
T a l k m a s t e r
PRE4
will be shown.
X T ® S o f t w a r e
P A G E 4 5