Audio Interface: Analogue Or Digital - Yellowtec b-line Manual

4.1.5

Audio interface: Analogue or digital

The b-line XT has analogue as well as digital Audio interfaces which can be
adjusted separately. The digital AES/EBU Audio input has an implemented
Sample Rate Converter to adjust the digital Audio clock to the line clock. Ad-
ditionally, clock inputs and outputs are available. To configure the Audio in-
terface please follow the instructions below:
NOTE
If you are not in the main menu please press the
– First press the
lect
.
– With the use of the cursor keys
Now press the
– Please mark the option
and
are displayed.
– Select the desired option with the cursor keys
the softkey
– To get back to the main menu please press the
asked if you want to
stored permanently in the system.
TIP
You reach the settings for the
key sequence:
O p e r a t i o n v i a
Menu
softkey and select
and
Select
Softkey.
Audio InPUT
or
Select
and press again . Now the options
Select
.
Save Settings?
Via the softkey
Audio Input
Menu 1 2 1 Menu 1 2 2
or
D i s p l a y a n d K e y p a d
key first.
System Settings
via the softkey
you reach the option
AUdio Output
using the cursor keys
Analogue
and
and and by pressing
button. Now you are
Yes
the setting is
Audio Output
respectively
Se-
Audio
.
Digital
via the
P A G E 2 7