Printing Flow - Konica Minolta bizhub 751 User Manual

Overview of printer functions
1.1.2

Printing flow

The following outlines the flow of operations for using this printing system as a printer.
The printer driver receives print commands from applications.
Data is transmitted to this machine over a USB interface when this machine is used via a USB connection,
or over an Ethernet interface (TCP/IP, IPX/SPX, or AppleTalk) when this machine is used via an Ethernet
connection. The data is then delivered from this machine to the printer controller, which performs image
rasterization (development of output characters and images to bitmap data). Finally, this data is printed from
this machine.
Original documents can be scanned in the copy function or network scan function while this machine is
operating as a printer. To use the copy functions, press the [Copy] key on the control panel.
When a print job is received during copying, the data is stored in the memory of this machine. When the
copying is completed, the print job is automatically printed.
IC-208
Downloaded From ManualsPrinter.com Manuals
Used with a USB
connection
Application
Printer driver
Note
When a connection is made with the USB port, the local interface kit is required.
Computer
Used with a network
connection
Application
Printer driver
Ethernet (TCP/IP, IPX/SPX,
USB
or AppleTalk)
Image processing
PS/PCL processing (rasterizing)
Printing system
Hard disk
Print
Secure Print
Save in user box
1
1-3