Other; Error Message - Konica Minolta bizhub 751 User Manual

Troubleshooting
Symptom
Paper is not fed from the specified pa-
per source.
The field for user authentication (ac-
count track) setting is grayed out, dis-
abling setting.
14.2.2

Other

Symptom
Printer driver installation fails.
The print job remains though the
printing is completed.
14.2.3

Error message

Message
Cannot connect to the network.
IC-208
Downloaded From ManualsPrinter.com Manuals
Cause
Paper will not be fed from the spec-
ified paper source if that paper
source is loaded with paper of a dif-
ferent size or orientation.
In the printer driver, the User Au-
thentication (Account Track) func-
tion may be disabled.
Cause
It has already been installed as a
Web Service-supporting printer in
Windows Vista.
"Network discovery" may be disa-
bled in Windows Vista.
Cause and remedy
A connection to the network could not be established. Check if the network
cable is correctly connected. In addition, check that the "Network Settings"
parameters in Administrator mode have been correctly specified.
Remedy
Load the paper source with paper of
the appropriate size and orientation.
In "Configure", specify a setting for
user authentication (account track).
Remedy
In Windows Vista, printer driver in-
stallation is deemed as completed
even if it is not completed if the in-
stallation has been performed using
the Web Service print. Uninstall the
printer in the Network window, and
then reinstall it.
To use the Web Service print in Win-
dows Vista, enable "Network dis-
covery" in "Network and Sharing
Center" on the computer.
14
14-5