Konica Minolta bizhub 751 User Manual page 48

Manual installation using the Add Printer wizard
5
6
7
8
9
IC-208
Downloaded From ManualsPrinter.com Manuals
Click "Add a network, wireless or Bluetooth printer".
– If the printer is not detected, turn off this machine, then on again.
– When turning off the power, then on again, wait at least 10 seconds before turning it on again.
Otherwise, this machine may not function properly.
The connected printers are detected.
Select this machine from the list, and then click the [Next] button.
– When using the LPR/Port9100 protocol, select the printer having its IP address.
– When using an SMB connection, select the printer having its "\\NetBIOS name\print service name".
– When using the SMB connection, click [Next], and then click [OK] in the "Connect to Printer"
window that appears.
– It may take some time to finish searching the entire list of printers.
Click the [Have Disk] button.
Click the [Browse] button.
Specify the desired folder on the CD-ROM that contains the printer driver, and then click the [Open]
button.
– Select the specified folder according to the printer driver to be used, the operating system, and the
language.
Printer drivers that can be selected:
PCL driver, PS driver, XPS driver, fax driver
– For details of the built-in CD-ROM construction, see
– For details on fax drivers, refer to the User's Guide [Fax Driver Operations].
"Contents of CD-ROM" on page
4
1-9.
4-13