Konica Minolta bizhub 751 User Manual page 159

Function detail description
5
IC-208
Downloaded From ManualsPrinter.com Manuals
– The password can also be preset in the printer driver as a default value so that it does not have to
set for each job.
– When user authentication is performed with the PageScope Authentication Manager, you must
enter the user information specified by the server administrator. The windows and input items that
appear vary according to the settings. For details, contact your server administrator.
Click the [OK] button, and specify the desired settings, and then print the document.
– If the entered user name is a name registered on the machine, the job is printed and counted as a
job for the specified user.
Reminder
If the user authentication settings are not specified on the Configure tab, user authentication cannot be
performed. If using the user authentication function, be sure to specify the settings on the Configure
tab. For details, refer to "Configure tab" on page
If performing user authentication on a server, the server settings must be specified. Click the [User
Authentication Server Setting] button to select the server.
Click the [Verify] button to communicate with this machine and check whether authentication can be
performed with the user that was entered. This function is not available unless the connection is
enabled for communications with the machine.
When authentication is performed using the PageScope Authentication Manager, in the Administrator
Settings of the machine, set [System Connection] - [OpenAPI Settings] - [Authentication] to "OFF". For
details, refer to
"Authentication Setting for OpenAPI Settings" on page
8-4.
12-44.
11
11-19