Additional Printer Specific Tools - Fargo DTC4500 User Manual

© 2011 HID Global Corporation

Additional Printer Specific Tools

Label Description
• Printer Type
INFO
• Firmware Version
• I.P Address
• Flipper
• Lamination
• Magnetics
• E-Card
• Password
• Card count
TEST Color Photo:
PRINTS
Select this to print a color card to test communication and integrity.
Alignment:
Select this to print a card used to align the print image on the card.
Settings:
Select this to print a card with the Advanced settings.
Resin:
Select this to print a RESIN test card.
Rewritable:
Select this to ERASE the Rewritable card.
Magnetic:
Select this to test Magnetic encoding. (Hi-Co only)
Lamination:
Select this to laminate a test card.
Hopper Abliity to select which hopper to feed cards from. Applies to Dual
Select Hopper Printers.
Toolbox
Clean Printer:
Select this to run the clean printer routine.
Clean Laminator:
Select this to run the clean laminator routine.
Calibrate Mag:
Select this to calibrate the Magnetic Sensor
DTC4500 Card Printer/Encoder User Guide
All rights reserved
L001444 Rev1.1
114