Fargo DTC4500 User Manual page 13

© 2011 HID Global Corporation
Technical Specifications
Term
Weight
Agency Listings
Supply Voltage
Supply Frequency
Warranty
Encoding Options
Supported
Options
Software
Display
DTC4500 Card Printer/Encoder User Guide
Function
Single-Sided: 9 lbs. / 4.1 Kg
Dual-Sided: 11 lbs. / 5 Kg
Dual-Sided: 20 lbs. / 9.1 Kg
Safety: UL 60950-1, CSA C22.2 (60950-1), and CE; EMC; FCC
Class A, CRC c1374, CE (EN 55022 Class A, EN 55024), CCC,
BSMI, KCC
100-240 VAC, 1.6 A
50 Hz / 60 Hz
Printer – Two years; Printhead – Two years, unlimited pass with
UltraCard™
• 125kHz (HID Prox) reader
• 13.56 MHz (iCLASS, MIFARE, ISO 14443 A/B, ISO 15693)
read/write encoder
• Contact Smart Card Encoder reads from and writes to all
ISO7816 1/2/3/4 memory and microprocessor smart cards
(T=0, T=1) as well as synchronous cards
•
ISO Magnetic Stripe Encoding, dual high- and low-coercivity,
Tracks 1,2 and 3
Single Wire Ethernet and USB 2.0 Interface for inline printing
and encoding (Note: Single wire Ethernet encoding is only
available for iCLASS and Contact Smart Card encoding); Dual-
Sided Printing Module – Upgradable; Same-Side Input / Output
Card Hopper – Upgradable; Smart Card Encoding (contact /
contactless) – Upgradable; Magnetic Stripe Encoding –
Upgradable; Printer Clearing Kit
Swift ID™Embedded Badging Application, FARGO Workbench
Diagnosis Utility
Color changing status buttons
All rights reserved
L001444 Rev1.1
13