Ports Tab - Ubiquiti TS-5-POE User Manual

TOUGHSwitch PoE User Guide
™
Chapter 6: Ports Tab
The Ports tab allows you to configure the Basic Settings,
Ping Watchdog settings, and alerts for each port of the
TOUGHSwitch.
The TOUGHSwitch image displays the active LEDs and
connections. See "Hardware Overview" on page 1
for more information. To change a port's settings, click the
port on the image. Then the port is highlighted in blue.
Total Throughput for TX and RX are also displayed.
Ubiquiti Networks, Inc.
Place your mouse over a port to view its PoE status,
Speed setting, duplex mode, and statistics for TX and RX
throughput.
For each port, the Ports tab displays its Port number, Name,
Status, PoE status, Link Speed, Ping Watchdog, STP status
(if enabled on the Device tab), and Alerts status. To sort
the ports in a specific order, click the appropriate column
head.
Save Changes To immediately save your changes, click
Save Changes.
Clone Settings for All Ports
changes for the selected port, click this button to apply
the same changes to all ports. Then click Save Changes.
WARNING: The PoE setting is also cloned. Ensure that
the same PoE setting suits all ports before you clone
the settings of the selected port.
Chapter 6: Ports Tab
After you have made
19