Hardware Overview; Back Panel; Front Panel Ports - Ubiquiti EdgeRouter Lite ERLite-3 Quick Start Manual

EdgeRouter Lite Quick Start Guide
™

Hardware Overview

Back Panel

Front Panel Ports

Console
CONSOLE
Interface
Console
Ethernet (0-2)
Reset
2
Ventilation Holes
Ethernet (0-2)
0
Description
RJ45 serial console port for Command Line Interface
(CLI) management.
10/100/1000 Mbps Ethernet ports.
To reset to factory defaults, disconnect the Power
Adapter from the Power port. Press and hold the
Reset button while connecting the Power Adapter
to the Power port. Keep holding the button until the
right LED on port 2 starts flashing and then stops
after a few seconds.
1 2
Power
12V DC
GROUND
Grounding Hole with
Grounding Screw
Reset
SPEED