Specifying Split-Screen Display - Canon WUX6000 User Manual

Setting Display Status (Input Settings)
Specifying Split-
Screen Display
> [Input settings] >
HDMI Component
Digital PC Analog PC
You can project two input images
side by side. (P67)
Off Exit split-screen mode.
On Activate split-screen mode.
Settings
Split Off Exit split-screen mode.
screen
On Activate split-screen
mode.
Control Left Give control rights to
rights screen the left side. "1" is
displayed on the left.
Right Give control rights to
screen the right side. "2" is
displayed on the right.
Swap Switch the sides that
right- images are projected
left on.
Layout Mode 3-7 Use 30% of the screen
width for the left side
and 70% for the right.
Mode 5-5 Divide the screen
width evenly for the left
and right side.
Mode 7-3 Use 70% of the screen
width for the left side
and 30% for the right.
[Split screen]
LAN
USB
82
Press the OK button to accept your
setting and then press the MENU
button. The image with control rights is
labeled "1" or "2."
• [Off] is the factory default.
• If or is displayed in the center of the
image area, switch control to the other side
by pressing the [ ] / [ ] buttons on the
remote control.
• When you switch to split-screen display, the
left and right signals and input status are
shown in the input window.
Network and USB input cannot be
combined for split-screen display.