Canon WUX6000 User Manual page 230

Menu Configuration
Advanced adjustment
Ambient light (when Photo/sRGB is selected)
Random noise reduction
MPEG noise reduction
Mosquito noise reduction
Dynamic gamma*1
Mem. color correct*2
6-axis color adjust
Fine-Tune Gamma
Lamp control
Lamp mode
Reset
Factory default settings are set according to the following conditions.
•
*1 [Off] by default when HDMI ([HDMI In]) is [Computer], or for Digital PC, Analog PC (1 or 2), USB, or LAN.
•
HDMI (when [HDMI In] is [Auto]) or Component: Weak
•
*2 For HDMI (when [HDMI In] is [Computer]), Digital PC, Analog PC (1 or 2), USB, or LAN, the factory default
is [Off] in image modes other than [VividPhoto]. Default in [VividPhoto] mode: [Middle].
•
For HDMI (when [HDMI In] is [Auto]) or Component, the factory default is [Weak], regardless of the image mode.
Off*
Adjust
Type
Level
Digital PC / Analog PC-1/2 / HDMI / Component
Off*
Weak
Middle
Strong
Digital PC / Analog PC-1/2 / HDMI / Component
Off*
Weak
Middle
Strong
USB / LAN
Off*
Weak
Middle
Strong
Off
Weak
Middle
Strong
Flesh
Sky
Green
Off*
Adjust
Reset
P93
Off*
On
Full power*
Power saver
OK / Cancel
*: Factory defaults (setting after reset)
230
P89
Tungsten
Fluorescent
L
H
P90
P90
P91
P91
Off P92
Weak
Middle
Strong
P92
Hue / Saturation /
Brightness
P94
P95
P95