Canon WUX6000 User Manual page 186

Completing Computer Settings
Item
SNMP
Receive community
Password
Confirm password
Setting Projector Information [Projector info.]
From [Projector info.] in the settings screen, you can enter relevant comments such
as projector names and locations where projectors are installed so that the
information can be used to identify projectors when multiple projectors are installed
on the network. For the setting procedure, refer to "Network Setting" (P179).
Item
Projector name
Comment
Some characters such as # cannot be used for [Projector name] and [Comment].
Explanation
Select the SNMP function version. If
OFF is selected, the SNMP function
will be turned off and the other
settings in this screen cannot be
changed.
Enter the community name which will
receive projector information in 1-byte
alphanumeric characters and symbols
(1 - 15 characters).
Enter the community settings
password in 1-byte alphanumeric
characters and symbols (8 - 15
characters). It can be set only when
the SNMP version is V3.
For confirmation, enter the same
password as you entered in
[Password].
Explanation
Enter the projector name in 1-byte
alphanumeric characters and
symbols (1 - 63 characters).
Enter any relevant notes, such as where
the projector is installed.
186
Factory default setting
OFF
<Blank>
<Blank>
<Blank>
Factory default setting
Canon Projector001
<Blank>