Removing The Lens Unit - Canon WUX6000 User Manual

Installation Procedure

■ Removing the Lens Unit

1
Perform steps 1 to 5 of "Installing the Lens Unit"
the sleeve.
2
Disconnect the lens cable from the lens connector.
When pulling out (disconnecting) the lens cable, press the buttons on both sides of the
lens cable connector while pulling out the cable.
3
Fix the lens cable as shown in the illustration and loosen the 4 screws to
remove the lens unit.
The 4 lens unit screws are attached to the lens unit and cannot be removed.
(P120
124
– P122) to remove