Canon WUX6000 User Manual page 33

Press D.SHIFT/KEYSTONE to correct
keystone distortion.
• Moves the image up, down, left, or right
when the screen aspect setting is [16:9 D.
image shift] or [4:3 D. image shift] is
selected. (P50, P51)
• To move the image, use the
[ ] / [ ]
buttons.
(5) D.ZOOM button (P64)
Zooms the image in or out digitally.
[+] button:
Zooms the image in (up to 12x).
[–] button:
Zooms the image out (1x minimum).
[ ] / [ ] / [ ] / [ ] buttons:
Move the zoom-in location.
(6) FREEZE button (P62)
Freezes the projected image.
(7) IMAGE button (P57)
Switches the image mode (image
quality).
(8) INPUT button (P40)
Switches the input signal.
(9) LENS-SHIFT button (P46)
Moves the lens up, down, left, or right.
[ ] / [ ] / [ ] / [ ] buttons:
Moves the image.
(10) ZOOM button (P45)
Adjusts the image size.
[ ] / [ ] buttons:
Increase the image size.
[ ] / [ ] buttons:
Decrease the image size.
(11) AUTO PC button (P43)
Adjusts tracking etc. automatically in
accordance with the signal from a
computer when the analog PC input is
selected.
(12) OK button (P73)
Determines the item selected from the
menu.
(13) Pointer buttons (P73)
Selects the upper, lower, left or right
item in the menu. Also used to assign a
channel to the remote control. (P102)
(14) MENU button (P72)
[ ] / [ ]
or the
Displays a menu on the screen. Also
used to assign a channel to the remote
control. (P102)
(15) VOL button (P63)
Adjust the sound volume.
[+] button:
[–] button:
(16) P-TIMER button
Cannot be used on this projector.
(17) MUTE button (P63)
Mutes the sound.
(18) BLANK button (P62)
Toggles between display / non-display
of image.
(19) LAMP button (P95)
Displays the power saver settings
screen, where you can adjust the lamp
mode (Full power / Power saver) (P95),
set the power management (P98) and
specify the network standby settings
(P167).
(20) GAMMA button (P87)
Adjusts the gamma of the image.
[ ] button:
[ ] button:
33
Increases the volume.
Decreases the volume.
Corrects dark parts of the image
so that they are easier to see.
Corrects bright parts of the image
so that they are easier to see.
Part Names