Canon WUX6000 User Manual page 182

Completing Computer Settings
If settings related to TCP/IP were changed, it is necessary to disconnect and reconnect to
the network.
If the network subnet mask was changed, select [Subnet mask] in the above screen and
set the new subnet mask.
Specifying Networked Multi-Projection Settings: [NMPJ Password]
From [NMPJ Password] in the settings screen, you can specify the items needed
for NMPJ authentication. For the setting procedure, refer to "Network Setting"
(P179).
Item
Password
Confirm password
For details on Networked Multi-Projection (NMPJ), refer to the separate user's manual.
Explanation
Enter the password required
for a networked multi-
projection connection in
single-byte alphanumeric
characters (0-15 characters).
For confirmation, enter the
same password as you
entered in [Password].
182
Factory default setting
<Blank>
<Blank>