Specifying Vertical Projection; Saving And Restoring Lens Positions - Canon WUX6000 User Manual

Specifying Vertical
Projection
> [Install settings] > [Professional
settings] > [Vertical projection]
HDMI Component
Digital PC Analog PC
You can ensure adequate cooling by
switching the fan mode to suit
upward- or downward-facing
installations.
For precautions, see "Install Facing
in the Correct Direction" on
117.
Off Does not alter the fan mode.
Upward Setting for use when the
projector faces upward
Downward Setting for use when the
projector faces downward
When the setting is completed, press
the OK button to accept your setting
and then press the MENU button.
• [Off] is the factory default.
• Be sure to perform this setting to use
vertical projection.
• Even if you complete this setting,
vertical projection will result in a
shorter useful life of the lamp and
other parts than horizontal
projection.
Installation-Related Menu Settings
Saving and Restoring
Lens Positions
> [Install settings] >
HDMI
LAN
Digital PC
USB
The projector can save information
about the lens position in memory.
Up to three sets of lens information
(including focus, zoom, and lens
shift settings) can be saved, and the
lens can be restored to these
page
positions.
If the OK button or [ ] button is
pressed, the [Lens - Position] screen is
displayed.
Select using the [ ] / [ ] buttons.
The following options are available on
the [Lens - Position] screen.
Load position
1–3
Save position
1–3
Lens shift
reset
Press the OK button to accept your
setting and then press the MENU button.
147
[Lens - Position]
Component LAN
Analog PC USB
Restores the lens to the
positions saved using
Save position 1–3.
Saves the lens position as
positions 1–3.
Restores the lens to the
original position.