USB KB Wake-Up From S3
This item allows user to enable using a USB keyboard, and allow a keystroke to
wake up the system from power saving mode.
Resume by Alarm
This item allows user to enable and key in Date/time to power on system
Disabled
Enabled
Data (of month) Alarm
Time (HH:MM:SS) Alarm
3.2.7
PnP/PCI Configurations
Note!
This "PnP/PCI Configurations" option is setting up the IRQ and DMA
(both PnP and PCI bus assignments.
Init Display First
This item is setting for start up Video output from PCI or Onboard device.
Reset Configuration Date
This item allow user to clear any PnP configuration data stored in the BIOS.
Resources Controlled By
–
IRQ Resources
This item allows you respectively assign an interruptive type for IRQ-3, 4, 5, 7,
9, 10, 11, 12, 14, and 15.
–
DMA Resources
This item allows you respectively assign an interruptive type for DMA, 0, 1, 2, 3,
4, 5, 6, and 7.
PCM-9590 User Manual
[Enabled]
[Disabled]
Disable this function.
Enable alarm function to power on system.
1-31
(0-23) : (0-59) : 0-59)
[PCI Slot]
[Disabled]
[Auto (ESCD)]
34