Advantech PCM-9590 User Manual page 41

Run VGA BIOS if S3 Resume
This item allows system to reinitialize VGA BIOS after system resume from
ACPI S3 mode.
Power Management
This item allows user to select system power saving mode.
Min Saving Minimum power management. Suspend Mode=1 hr.
Max Saving Maximum power management. Suspend Mode=1 min.
User Define Allows user to set each mode individually.
Suspend Mode= Disabled or 1 min ~1 hr.
Video Off Method
This item allows user to determine the manner is which the monitor is blanked.
V/H SYNC+Blank This option will cause system to turn off vertical and horizontal syn-
chronization ports and write blanks to the video buffer.
Blank Screen This option only writes blanks to the video buffer.
DPMS Initial display power management signaling.
Video Off In Suspend
This item allows user to turn off Video during system enter suspend mode.
Suspend Type [Stop Grant]
This item allows user to determine the suspend type.
Modem use IRQ
This item allows user to determine the IRQ which the MODEM can use.
Suspend Mode
This item allows user to determine the time of system inactivity, all devices
except the CPU will be shut off.
HDD Power Down Mode[15 Min]
This item allows user to determine the time of system inactivity, the hard disk
drive will be powered down.
Soft-Off by PWR-BTTN
This item allows user to define function of power button.
Instant-Off Press power button then Power off instantly.
Delay 4 Sec Press power button 4 sec. to Power off.
Wake-Up by PCI card
This item allows user to defines PCI cards to wake up the system from the sus-
pend mode.
Power On by Ring
This item allows user to define the system will resume by activating of modem
ring.
[Auto]
[Min Saving]
[DPMS]
[Yes]
[3]
[1 Hour]
[Enabled]
[Enabled]
[Enabled]
33 PCM-9590 User Manual