Advantech PCM-9590 User Manual page 12

Graphic and Video
Controllers
1.3.1.3 Chipset (ICH7M)
IDE Interface
H.D. Codec
ALC883 I/F
Concurrent PCI Bus
Controller
SATA Connector
PCM-9590 User Manual
945 GM GMCH Supports
150 MHz core clock at 1.05 V core voltage
400 MHz Integrated RAMDAC
Two SDVO ports multiplexed with PCI Express graphic
interface
Dual Channel LVDS interface support 36 bits
TV-Out has three integrated 10bit DACS with HDTV
support (480p/720p/1080i/1080p) cable
CRT monitor resolutions supported:
Supports up to QXGA(2048x1536)
LVDS panel resolution supported:
Supports up to UXGA(1600x1200)
Dual independent display options with digital display
Analog CRT Connector:
D-Sub 15 pins 5 mm (Black)
LVDS1 connector:
Hirose DF13 type 40 pin
ICH7M Supports
Single, independent IDE signal channel
Supports up to two IDE devices with independent timings
Ultra ATA/100/66/33 and PIO modes
IDE Primary Connector:
40 pins 2.54 mm Box Header
ICH7M Supports
Support for three AC'97 2.3 codes
Independent bus master logic for 8 channels
Supports up to six channels of PCM audio output
PCI functions for audio and modem
Connectors:
Internal Speaker: Wafer box 2.0 mm 4 pins (M)
Line-out, Line-in, Mic-in: Pin header 12*2P (M) 2.0 mm
PCI-104+:
ICH7M chip supports:
PCI 2.1 compliant
32-bit 3.3 V 33 MHz PCI interface with 5 V tolerant inputs
Supports PC/PCI DMA
ICH7M Supports
Supports independent DMA operation on two ports
Supports data transfer rates of up to 3.0 Gb/s (300 MB/s)
Operation of AHCI using memory space
Supports several optional sections of the Serial ATA II
SATA connecters.
Connecter: Serial ATA II 7 pins 1.27 mm x 2
4