How To Set Up The Size And Position Of Pip - RGBlink VSP 168S User Manual

6. System Setup and Operation

How to Set up the Size and Position of PIP

How to Set up the Size and Position of PIP
1. Press MENU button, enter menu option:
2. Rotate the knob, choose 【OUTPUT】;
3. Press the knob to confirm, rotate the knob again, choose【PIP】;
4. Press the knob to confirm, rotate the knob again, choose【SELECT】,
choose IMAGE A as main image;
5. Press MENU button, rotate the knob, choose【OUTPUT】, enter and choose
【SCALE】.
6. User can set the size and position of IMAGE A according to actual need:
7. After setting, with the same steps, choose IMAGE B as the sub-image, and
with the same setting as IMAGE A.
8. With above steps, can complete the setting of size and position of PIP.
VSP 168S
>INPUT > >
OUTPUT > >
INPUT > >
>OUTPUT > >
PICTURE > >
>PIP > >
>SELECT IMAGE A
OUTPUT ADJUST > >
>SCALE
>H SIZE 1920
V SIZE 1080
>H POS
V POS
User Manual
> >
0
0
89