How To Realize Single Image Switching - RGBlink VSP 168S User Manual

6. System Setup and Operation

How to Realize Single Image Switching

How to Realize Single Image Switching
Boot the system default CV1 to the current input source (key light and
scintillation), if need seamless switching other source such as DVI, direct
light touch DVI key, LCD screen display as follows:
Choose DVI buttons, button lamp CV1 destroy, and DVI key light and
shining, it can realize single picture of input signal source switching (input
signal source by original CV1 switching to DVI).The same method can be
switched CV2, VGA, SDI.
Note
Seamless switch: means signal switch will not
appear any flash point, black, shaking or delay
VSP 168S
SOURCE SELECT:
>DVI
User Manual 85