Large Screen Only Displays Part Of The Image; Signal Needs To Scale; No Display In The Second Half Part Of Large Screen; Resolution Is Insufficient - RGBlink VSP 168S User Manual

Large Screen Only Displays Part of the Image

Signal Needs to Scale

Press【SCALE】button in the processor and knob to adjust the actual
screen size of the screen, including the "width", "height" and "starting
position", remember to press the knob to confirm.

No Display in the Second Half Part of Large Screen

Resolution is Insufficient

Please make sure the points of the screen width and height, choose the
resolution to be bigger than screen width by button 【MENU】under
OUTPUT RES, and press the knob to confirm.

Left Screen Appears Two Black Sides

Adjust DE Deviation

This phenomenon needs to adjust the DVI output and DE migration of the
processor, through the 【MENU】 to find "OUTPUT" and find the
corresponding output name, such as "DVI1 OUT ADJUST", and find "DVI1
DE" again, make an adjustment for corresponding horizontal and vertical
DE, please remember to save to the corresponding channel after setting up,
save to SAVE1 by default.
VSP 168S User Manual 101